Shunan Adhesive for Natural Facing Stones

FOB Reference Price:Get Latest Price
US $360-460 / Tons | 1 Ton/Tons (Min. Order)
Report Suspicious Activity
Quick Details
Place of Origin:
Shanghai, China (Mainland)
Main Raw Material:
Construction, Building construction
Brand Name:
Model Number:
Cements and additives, sand, polymers
Grey or White
Quality System Standard:
ISO 9001:2008
Cement Mortar
Supply Ability
Supply Ability:
50 Ton/Tons per Day
Packaging & Delivery
Packaging Details
Packed in 40kg plastic lined paper sacks
Lead Time :
5 days


For fixing ceramic,porcelain and natural stone tiles:
low porosity tiles or substrates,tiling onto existing tiles,walls&floors

Shunan. SA814 natural stone tile adhesive  for walls & floors

Can be used with most tile types including porcelain and natural stone      




  • Weight: 40kg
  • Color: white
  • Standard: GB24264-2009
  • Shelf life: 6 months from production date
  • Storage: unopened bag on plate in dry place

Field of Application

 .Used to fix natural stones, which thickness is less than 20mm when fixed on wall

 ·Used to fix natural stones both on inside and outside walls and floors

 ·Stone fixed on wall higher than 3.5m suggested to be fix with mechanical anchor together

 ·Used for fixing tiles in dry and damp area    


 7~10 kg/m2, dependant on the stone types and adhesive density

Application properties

 1) Water addition: 0.23 liter/kg powder (9.2 liter /40kg)

 Add water to the mix until you have an adhesive the same consistency as peanut butter.

 2) Joint thickness: 5-7mm

 3) Adjust time: 10-15 min

 4) Pot life: 4 hours

Technical Information


Ordinary ground


Full load

ground and the wall



Tensile adhesive Strength              

0.5 N/mm2

1.0 N/mm2

Tensile adhesive strength after soaking 

Tensile adhesive strength after heat aging 

Tensile adhesive strength after 

freeze-thaw cycles   ≥

Tensile adhesive strength after 20 min open time 

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate preparation


  • Substrate should be flat ,hard, level, dry, and clean with normal absorption
  • Clean the surface until free of grease, dust or any stains
  • Old paint or plaster should be removed
  • Substrate been repaired should be preserved at least 48 hours


Using a mechanical mixer, add 25kg Shunan glass block mortar to 5.75 litres clean water while mixing. Mix well to a creamy, lump-free consistency. Let the mix stand for 3 - 5 minutes before stirring again. Use within 5-6 hours (20°C).


1. Apply the mix to the surface using a notched trowel for tiles, the mix can be applied in bed thicknesses between 5 - 7mm, coverage is approximately 5 -10kg/m2, actual coverages will be determined by site conditions, workmanship, etc)

2. Apply only as much adhesive as can be tiled in 10-15 minutes to prevent the adhesive from “skinning” before the tiles are applied

3. Bed tiles firmly using a rubber mallet. When tiling exterior walls ensure the tiles is in full contact with the adhesive. Occasionally, life a block to ensure that there are no air pockets. Never fix tiles using the ‘spot’ method.
Application Environment:

1. Ambient temperature: 5°C~35°C

2. Avoid application if too hot or freezing weather

3. Avoid application under direct sunlight and strong wind


  • May cause serious damage to eyes
  • May be sensitive to skin in case of contact. lrritable for eyes, respiratory system and skin
  • Keep out of the reach of children
  • Avoid breathing the dust
  • In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
  • Wear suitable protective clothing,gloves and eye / face protection