• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Type: Tiles
  • Place of Origin: Shanghai, China (Mainland)
  • Brand Name: SA
  • Model Number: SA-812
  • Size: 300 x 300mm, 300 x 450mm, 300 x 600mm, 400 x 400mm, 600 x 600mm, 800 x 800mm
  • Material: Ceramic Tiles
  • Usage: Interior Tiles
  • Function: Acid-Resistant, Firebrick, Heat Insulation, Non-Slip, Wear-Resistant
  • Surface Treatment: Full Body Tiles
  • Color Family: Blacks, Blues, Grays, Greens, Oranges, Whites, Yellows / Golds
  • Tile Type: Borders, Floor Tiles, Wall Tiles
  • Product Name: Ceramic Tile adhesive adhesive
  • Raw metarial: cement
  • Other name: SA
  • Color: Gray
  • Tile: Polished Tile Machine
  • Item: 67*31.5*10.3cm
  • Application: Construction
  • Surface: Polished Surface
  • Shelf life: 6 months
  • Quality Management System: ISO9001:2008

Packaging & Delivery

Packaging Details Double anti moisture bag,also available on request
Delivery Time Shipped in 5 days after payment
Product Description

  Shunan Ceramic Tile adhesive SA812 is a polymer modified cement based adhesion material. Ideal for all kinds of ceramic wall tiles and floor tiles with wide gap..

 

Scope of Use

1. Can be used on substrates that ready for coating and non-shringking: concrete, cement plaster, concrete panel, and brickwork with plaster directly

2. Can be used for water absoption less than 0.5%,Ceramic tile size (≤300*600) mm on the interior wall.

Substrate Preparation

1.Substrate must be even, sound, clean, free of dust, grease, waxiness or release agent which may cause separation.

2.Appearance coating should be cleaned, and the area of coating residue should be less than 20%.

3.Fresh concrete substrate can be tiled at age of 28 days, Fresh plaster substrate can be tiled at the age of 7days.

4.Old concrete and plaster substrate should be tiled after being cleaned by industrial detergent, washed by high pressure tap and dried in the air for 24 hours.

5.Substrate should be coating with Interface agent if Impregnate concrete with high coefficient of water absorption or dust is hard to remove.

6.Substrate should be wet inside and dry outside before construction in such conditions: high temperature, dry conditions, high coefficient of water absorption.

 

Construction Methods

1. Pour clean water into a mixing container by water/powder proportion of 1:4, before adding ceramic tile adhesive SA-812 slowly. Meantime, open agitator and start mixing evenly from top to bottom until completely free of lumps. Allow the mixture to nature for short time. Then mix again slightly before using.

2. Use a flat scraper to spread a layer of adhesive onto the whole substrate surface, then use suitable tooth side of scrape in the angle of 69°with the substrate to draw stripes in straight direction and then fix ceramic tile on.

3. It should be double-sided if fissure on the back of ceramic tile is too deep or the stone ( ceramic tile) is too big and heavy. Namely, both construction and substrate surface should be spread with adhesive.

 

 

 

 

Notes

1. The construction temperature: 5-35℃

 

2. The ratio of water and material can be adjusted appropriately according to substrate materials, weather, construction conditions, ect.

 

3.Well mixed adhesive should be used out within 2-3 hours , It should be abandoned instead of being recycled after mixing with water when appearing indurated .

 

4.There should be protection measures during rainy days. Make sure the construction area can not get wet within 24 hours after construction.

 

5.Temporary fixation measures should be taken when fixing tiles.

 

 

 

 

Reference dosage:

Under the condition of the formation on the surface of the base, theoretical dosage is about: 3.5-7 kg/m2. The specific amount varies depending on the base level and brick

 

Shelf life:

Unopened product is stored in a dry, cool, ventilated place, shelf life is one year.

 

Execution standard:

JC \ T547-2005 "ceramic tile adhesive "

 

 

Packaging & Shipping

 

 

Packaging Details: Double anti moisture bag,also available on request

Delivery Detail: 3 days

 

 

Company Information

Shun An Building Materials Co., Ltd. was established in 2004, is located in Zhoupu town pudong new area, Shanghai Shen Mei road 123 leaves make the remit bay 3 floor, room 308, it is a professional supplier of thermal insulation materials and exterior insulation system construction units, the Shanghai Building Materials Industry Association, the Shanghai Testing Industry Association member units . The company committed to the development and construction of external wall insulation system, currently undertaking the construction project include: EPS / XPS thin plaster external wall insulation system, GPEPP insulation systems, rigid polyurethane foam wall insulation system, inorganic glass beads of external wall insulation systems.

 

 

 

Our Services

1. We can design and produce products based on the client's requirements.

2. FOB Chinese port, CIF, CFR and EXW trade terms are available for you. We will give youmost competitive price.

3. Our factory is located in shanghai , It is easy for youto visit our factory.

4. We believe to supply you our best services.

5.Reply your inquiry in 8working hours.

6.Experienced staffs answer all your questions in fluent English

7.Customized desigh is available,OEM is welcomed.

8.Special discount and protection of sales area provided to our distributor

 

 

 

 

Contact us

Phone number: 86-021-33936290

PHONE:86-021-13918863461

QQ:  2880082974

Skype:931695199(at)qq.com

Web:www.shunan51.com

Company:Shanghai Shunan Building Materials Co., Ltd.

Add: Room 308,Building No. 3,Lane 123,ShenMei Road,Zhoupu,Shanghai(201318),China

 

 

 

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview

Transactions

Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
4 Transactions 20,000+
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $35,000
Learn More