·Good adhesive strength with substrate and thermal insulation layer
·Good application property
·Single component and only mix with water, easy to be controlled
·Good compatibility with other components of the whole system
SA-805 Gray Insulation interface mortar Mainly used for joints the substrate and insulation layer of insulation work,adhesvie strength between them can be increased by around 50%,has higher hydrolysis,damp and hot & freeze-thaw resistance performance,avoid phenomenons of empty drum, up shell,falling off of the insulation layer
1) Only mix with water, no other addition
2) The temperature of air from 5°C~35°C
3) The mixing must be used up in 2h
4) Avoid sunshine, high temperature and freezing
5) Avoid strong wind during application
6)Avoid rain during application
Mix ratio with water:1kg / 0.23L, 40kg/ 9.2L
Smart tip:mix the compounds thoroughly, then leave it for several minutes, before mixing it again.
Items of Interface Treating Agent
Water resistant strength(28d+soaking7d)
Freezing-thawing resistant strength
trowel, elec-mixer, bucket
The substrate should be sound,dry, flat, clean and durable
1) May cause serious damage to eyes
2) May be sensitive to skin in case of contact. lrritable for eyes,respiratory System and skin
3) Keep out of the reach of children
4) Avoid breathing the dust
5) In case of contact with eyes,rinse eyes immediately with plenty of water and consult a doctor
SA805 is a part of Shunan - External Wall Insulation systems of external building walls
Shun An Building Materials Co., Ltd.was established in 2004, is located in Zhoupu town pudong new area, Shanghai Shen Mei road 123 leaves make the remit bay 3 floor, room 308, it is a professional supplier of thermal insulation materials and exterior insulation system construction units, the Shanghai Building Materials Industry Association, the Shanghai Testing Industry Association member units . The company committed to the development and construction of external wall insulation system, currently undertaking the construction project include: EPS / XPS thin plaster external wall insulation system, GPEPP insulation systems, rigid polyurethane foam wall insulation system, inorganic glass beads of external wall insulation systems.
1. We can design and produce products based on the client's requirements.
2. FOB Chinese port, CIF, CFR and EXW trade terms are available for you. We will give youmost competitive price.
3. Our factory is located in shanghai , It is easy for youto visit our factory.
4. We believe to supply you our best services.
5.Reply your inquiry in 8working hours.
6.Experienced staffs answer all your questions in fluent English
7.Customized desigh is available,OEM is welcomed.
8.Special discount and protection of sales area provided to our distributor