SA Adhesive for Light Weight Foam-Concrete Blocks

FOB Reference Price:Get Latest Price
US $200-300 / Tons | 1 Ton/Tons (Min. Order)
Report Suspicious Activity
Quick Details
Place of Origin:
Shanghai, China (Mainland)
Brand Name:
Model Number:
Joint Mortar
Cement Mortar
grey or white
Quality System Standard:
ISO 9001-2008
Supply Ability
Supply Ability:
50 Ton/Tons per Day
Packaging & Delivery
Packaging Details
Net 40 kg paper bags
Lead Time :
5 days


1)Good workability
2)Weatherproof, frost-resistant
3)No rapid loss of water,strong friction bond
4)Easy correction of brick

SA813 Glue For Light Porous Concrete Bricks  


It's a high quality cementitious adhesive specifically formulated for installation concrete products such as blocks, panels and lintels. Backed by extensive testing and historical performance, the use of the adhesive ensures optimum compatibility and performance of the completed installation including strength and fire rating,Shunan mortar can be applied for interior and exterior use on horizontal and vertical surface


Suitable for interior and exterior use. Provides thin economical layer and guarantees absence  


Shelf life: 6-8 months from production date 





Technical Information


Mortar class in accordance with 


JC890-2001: Mortar group 


Accordance with JC890 2001:


Compressive strength:                  > 10 N/mm2

Grain size:                                     0 - 0.5mm

Processing/working time:            Approx. 3 hours at 20°C    

Processing temperature:             > + 5 °C. and < + 50°C

Dry density:                                  < 1800 kg/m3

Water required:                      Approx. 10 l to every 40 kg

Quantity required:                        Approx. 7 kg/m2

Storage:                                       Store appropriately in dry


Packaging:                                  40-kg sack

Colours:                                       Grey



1) Weatherproof, and resistant to frost after hardening


2) Strong friction bond due to the adjustment of the water retention properties to suit the absorbency characteristics of the aerated concrete


3) NO rapid loss of water, or loss of water to the subsurface


4) Easy correction of brick position after the brick has been laid


5) Good workability  


6) Fulfills the mortar requirements for subsequent thin plastering


Mix ratio with water: APPROX. 0.23 l :1 kg


Types for application:


1) Special dry mortar for bonding extremely absorbent aerated-concrete high-precision units and elements

2) For thin mortar joints, 1 to 3 mm thick

3) For application using a mortar sledge or thin-bed roller.




1) Add the 40kg of dry mortar contained in the sack to approximately 10 litres water and mix, either by hand or using a mixer, to a smooth workable paste. The correct consistency has been achieved if the mortar stands in a stable ridges when scored with a notched trowel. After allowing the adhesive to rest for approximately 5 minutes, mix the mortar again briefly. Apply the mortar without adding any further ingredients.


2) The first layer of high precision units must be laid horizontally and flush in the mortar bed. Before laying and bonding the second layer of units, level off any uneven areas. Clean any dust from the surfaces of the units.the adhesive should be applied for no more than 2 or 3 high precision unit lengths at a time. Apply by hand or using a mortar sledge to comb the mortar into place in a layer approximately 1 to 3 mm thick. Put the high precision units into place from above, wherever possible, and tap into position using a rubber hammer. Avoid pushing the units along longitudinally.


3) The fresh masonry work must be protected from unfavourable weather conditions such as very high and very low temperatures, frost, draughts, direct sunlight and driving rain (by covering with a plastic sheet, for example). Do not carry out works at air and masonry temperature below +5°C.