• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Place of Origin: Shanghai, China (Mainland)
  • Main Raw Material: Other
  • Usage: Construction, Joint Mortar
  • Brand Name: Shunan
  • Model Number: SA814
  • Quality Management System: ISO9001:2008
  • Material: Cement based
  • Color: Grey/White
  • Type: Cement Mortar

Packaging & Delivery

Packaging Details In 25 kg paper bags, also available on request
Delivery Time 3 days


- Used to fix tiles on inside and outside
- Walls and floors
- At dry and damp area
- Long lasting durability

Shunan multi purpose tile glue/adhesive

Tile glue is a blend of portland cement, sand, special polymer additives for the installation of tiles over a variety of surfaces, including properly prepared exterior grade plywood, requires no additional latex or fortifiers



Shunan Multi-Purpose (SA814) is used as a bond coat for installation of high-lug absorptive tiles, semi-vitreous, vitreous tiles or marble tile on acceptable surfaces.


Shunan Multi-Purpose is suitable for use as a bond coat for tiles over interior or exterior horizontal or vertical surfaces which are rigid and non-flexing. Available in white or gray.





· Used for fixing low porosity tiles (water absorption less than 6%) such as porcelain tiles,natural stone, etc


· Used for fixing tiles both on inside and outside walls and floors


· For tiles fixed on external walls higher than 3.5m, the size of the tiles is suggested to be less than 30×30cm


· Used for fixing tiles on rigid substrate


· Stone fixed on wall higher than 3.5m suggested being with mechanical anchor together


· Used for fixing tiles in dry and damp area



5~10 kg/m2

Mix ratio with water

1kg powder/ 0.23 liter

Joint thickness

3 - 7 mm

Tiling marble and heavy duty tiles


Technical Data


Ordinary ground

Heavy duty 

ground and the wall



Tensile  Adhesive Strength          

0.5 N/mm2

1.0 N/mm2

Tensile Adhesive Strength after Soaking   ≥

Tensile  Adhesive Strength after Heat Aging    

Tensile  Adhesive Strength   

after Freeze-Thaw Cycles  ≥

Tensile  Adhesive Strength 

after 20 min open time  

Typical Physical Properties



Shearing Strength(14 Days)

≥1.0 Mpa

Water Resistantce(14d+7d in water)

≥0.7 Mpa

Freeze-thaw Resistance (15 cycles)

≥0.7 Mpa

Heat Resistance

≥0.7 Mpa

Compressive Strength(14 Days)

≥19 Mpa

Linear Shrinkage

 < 0.5%

Substrate requirement

The substrate should be hard, sound, dry, flat, clean and durable

Substrate preparation

- Substrate should be flat ,hard, level, dry, and clean with normal absorption

- Clean the surface until free of grease, dust or any stains

- Old paint or plaster should be removed

- Substrate been repaired should be preserved at least 48 hours


Using a mechanical mixer, add 25kg Shunan multi purpose tile glue to 5.75 litres clean water while mixing. Mix well to a creamy, lump-free consistency. Let the mix stand for 3 - 5 minutes before stirring again. Use within 5-6 hours (20°C).


1. Apply the mix to the surface using a notched trowel for tiles, the mix can be applied in bed thicknesses between 5 - 7mm, coverage is approximately 5 -10kg/m2, actual coverages will be determined by site conditions, workmanship, etc)


2. Apply only as much adhesive as can be tiled in 10-15 minutes to prevent the adhesive from “skinning” before the tiles are applied


3. Bed tiles firmly using a rubber mallet. When tiling exterior walls ensure the tiles is in full contact with the adhesive. Occasionally, life a block to ensure that there are no air pockets. Never fix tiles using the ‘spot’ method.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
Trade Assurance
China (Mainland) | Manufacturer, Trading Company
Transaction Level:
Supplier Assessments:
4 Transactions 20,000+
The supplier’s transactions conducted via Alibaba.com in the past 6 months.
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $35,000
Learn More