- Very strong bond strength
- Long working time for difficult layouts
- For layer of thicknesses of 4 to 5mm
SHUNAN GLUE FOR BACKSPLASH TILES
SA Glass Tile Mortar is a white Portland cement based mortar suitablefor glass-tile masonry construction
SA Glass Tile Mortar is used for laying glass tile for both interior and exterior walls. It can also be used for tuckpointing,stucco, or other decorative applications where white mortarwould be appropriate.
• SA Glass Tile Mortar - 55 lb (25 kg) bags
6 - 8 kg/m2
SA Glass Tile Mortar exceeds GB24264-2009 property requirements for Type S Mortar achieving a compressivestrength in excess of 1,800 psi (12.4 MPa) at 28 days.
Glass block must also be properly cleaned forbest bond. Follow the instructions of the glass block manufacturer forbest cleaning method.
Thoroughly mix SAGlass Tile Mortar with clean waterto astiff plastic like consistency. Use 10 L of water per 88 lb (40 kg) bag. Mix thoroughly for about 5 minutes. Stir materialoccasionally to keep mix workable; however, no additional water
should be added
Use a damp cloth to remove all excess mortar from the surface of
glass blocks before the mortar hardens. Polish off remaining mortarresidue with a clean, dry, soft cloth.
Proper curing increases the strength and durability of concrete.curing should be started as soon as possible
Mix only with clean water. Under extreme weather coconditions,appropriate cold-weather and hot-weather precautions should be followed.
ShunanCompanies warrant this product to be ofmerchantable quality when used or applied in accordance with theinstructions herein.